Processor · high

How to fixBCLK-JITTER

Base clock instability (BCLK)

What this error means

This high-severity issue affects the processor (CPU). The basic frequency generator on the board fluctuates. Reports of Base clock instability (BCLK) usually describe a sudden crash, brief unresponsiveness, or a stop-code screen appearing out of nowhere. The usual suspects are dried thermal paste, overclocking too aggressively, silicon degradation and weak power supply. Use the steps below to track down and fix the cause.

Before you begin

Save open work and back up important files. Note any recent driver or hardware changes. If Windows cannot start, use the startup guide first.

Work through these checks

0 of 3 complete
01Improve cooling and repast

Improve cooling and repast.

Use the instructions for your exact device and operating system. Check the manufacturer’s documentation before changing firmware, hardware, or system settings.

I need help
02Increase LLC (Load-Line Calibration) in BIOS

Increase LLC (Load-Line Calibration) in BIOS.

Use the instructions for your exact device and operating system. Check the manufacturer’s documentation before changing firmware, hardware, or system settings.

I need help
03Undervolting

Undervolting.

Use the instructions for your exact device and operating system. Check the manufacturer’s documentation before changing firmware, hardware, or system settings.

I need help

Possible causes

  • Dried thermal paste
  • Overclocking too aggressively
  • Silicon degradation
  • Weak power supply