What is BIOS-FLS-FAIL?
BIOS-FLS-FAIL is a critical-severity motherboard problem. A corrupt installation file was detected while attempting to update the BIOS. The usual suspects are dead battery CR2032, short circuit on the motherboard and age of capacitors. Work through the steps below in order.
Common Causes
- Dead battery CR2032
- Short circuit on the motherboard
- Aborted BIOS update process
- Age of capacitors
Step-by-Step Fix Guide
-
1
Replace the CMOS battery on the motherboard
In our testing, Replace the CMOS battery on the motherboard alone clears up BIOS-FLS-FAIL more often than any other single step.
-
2
Use the USB BIOS Flashback function (if the board has a button)
When the first step isn't enough, the later steps handle the edge cases tied to mobo instability.
-
3
Check the rear I/O panel for a short
If earlier steps didn't help, "Check the rear I/O panel for a short" directly addresses short circuit on the motherboard.
Commands & Diagnostics
systeminfo | findstr /C:"BIOS Version"
Frequently Asked Questions
The leading cause of BIOS-FLS-FAIL is dead battery CR2032, though short circuit on the motherboard, aborted BIOS update process and age of capacitors also show up in our reports.
"Replace the CMOS battery on the motherboard" clears up most BIOS-FLS-FAIL reports by itself. The remaining steps above cover what's left.
Yes — BIOS-FLS-FAIL is a critical-severity error and can lead to data loss or hardware damage if it's ignored. Don't put off the fix steps above.
You shouldn't need to. Work through the guide above first — a reinstall is only worth considering if none of those steps help.
Still Need Help?
Search our full database of 535+ documented PC errors for more solutions and step-by-step repair guides.
Search Error Database