Save open work and back up important files. Note any recent driver or hardware changes. If Windows cannot start, use the startup guide first.
Work through these checks
0 of 4 complete01Enter BIOS (Del/F2/F12)
Enter BIOS (Del/F2/F12).
Use the instructions for your exact device and operating system. Check the manufacturer’s documentation before changing firmware, hardware, or system settings.
02Set correct drive as first boot
Set correct drive as first boot.
Use the instructions for your exact device and operating system. Check the manufacturer’s documentation before changing firmware, hardware, or system settings.
03Remove unnecessary boot media
Remove unnecessary boot media.
Use the instructions for your exact device and operating system. Check the manufacturer’s documentation before changing firmware, hardware, or system settings.
04Save the settings and reboot
Save the settings and reboot.
Use the instructions for your exact device and operating system. Check the manufacturer’s documentation before changing firmware, hardware, or system settings.
Possible causes
- Incorrect boot device order
- Attached USB with bootable media
- More OS installations
Was this helpful?
Your progress is saved on this device.