Storage · high

How to fixTRIM-IGNORE

TRIM command to clean SSD was ignored

What this error means

TRIM-IGNORE is a high-severity storage drive (SSD/HDD) problem. The SSD does not clean up the deleted blocks, which reduces the speed extremely. Reports of TRIM command to clean SSD was ignored usually describe a sudden crash, brief unresponsiveness, or a stop-code screen appearing out of nowhere. Common triggers are end of life (age), defective cable, power outages and high temperatures in the M.2 slot. Work through the steps below in order.

Before you begin

Save open work and back up important files. Note any recent driver or hardware changes. If Windows cannot start, use the startup guide first.

Work through these checks

0 of 3 complete
01Back up all data immediately

Back up all data immediately.

Use the instructions for your exact device and operating system. Check the manufacturer’s documentation before changing firmware, hardware, or system settings.

I need help
02Try replacing the SATA data cable

Try replacing the SATA data cable.

Use the instructions for your exact device and operating system. Check the manufacturer’s documentation before changing firmware, hardware, or system settings.

I need help
03Run manufacturer diagnostics

Run manufacturer diagnostics.

Use the instructions for your exact device and operating system. Check the manufacturer’s documentation before changing firmware, hardware, or system settings.

I need help

Possible causes

  • End of life (age)
  • Defective cable
  • Power outages
  • High temperatures in the M.2 slot