What is RING-BUS-FAIL?
Loss of internal bus synchronization ranks as a high-severity processor (CPU) issue in our database. The bus connecting the cores inside the processor collapsed. The usual suspects are dried thermal paste, overclocking too aggressively, silicon degradation and weak power supply. Use the steps below to track down and fix the cause.
Common Causes
- Dried thermal paste
- Overclocking too aggressively
- Silicon degradation
- Weak power supply
Step-by-Step Fix Guide
-
1
Improve cooling and repast
In our testing, Improve cooling and repast alone clears up RING-BUS-FAIL more often than any other single step.
-
2
Increase LLC (Load-Line Calibration) in BIOS
If the fault persists, continue with the next steps, which account for less common cpu instability causes.
-
3
Undervolting
For lingering RING-BUS-FAIL cases, "Undervolting" is worth running through.
Commands & Diagnostics
wmic cpu get status,name,currentclockspeed
powercfg /query
Frequently Asked Questions
The leading cause of RING-BUS-FAIL is dried thermal paste, though overclocking too aggressively, silicon degradation and weak power supply also show up in our reports.
The fastest fix is "Improve cooling and repast". Only move on to the later steps if RING-BUS-FAIL keeps coming back.
RING-BUS-FAIL is a high-severity error. It won't damage your PC instantly, but repeated occurrences usually point to a deeper problem worth addressing soon.
In most cases, yes — the guide above resolves RING-BUS-FAIL without a clean install. Treat a reinstall as the last resort, not the first move.
Not necessarily. RING-BUS-FAIL can be triggered by software and driver issues, overclocking instability, or BIOS misconfigurations — not just hardware failure. Run through the diagnostic steps above before concluding the processor itself is defective.
Still Need Help?
Search our full database of 535+ documented PC errors for more solutions and step-by-step repair guides.
Search Error Database