Network · medium

How to fixWLAN-RST-LOOP

Constantly restarting the Wi-Fi adapter

What this error means

WLAN-RST-LOOP shows up as a medium-severity network adapter fault. The Wi-Fi card keeps disconnecting and restarting due to a driver error. Typical causes include stuck Router and IP address conflict. Use the steps below to track down and fix the cause.

Before you begin

Save open work and back up important files. Note any recent driver or hardware changes. If Windows cannot start, use the startup guide first.

Work through these checks

0 of 3 complete
01Restart the router (turn off for 1 minute)

Restart the router (turn off for 1 minute).

Use the instructions for your exact device and operating system. Check the manufacturer’s documentation before changing firmware, hardware, or system settings.

I need help
02Reset complete network settings in Windows

Reset complete network settings in Windows.

Use the instructions for your exact device and operating system. Check the manufacturer’s documentation before changing firmware, hardware, or system settings.

I need help
03Change the DNS servers to 8.8.8.8

Change the DNS servers to 8.8.8.8.

Use the instructions for your exact device and operating system. Check the manufacturer’s documentation before changing firmware, hardware, or system settings.

I need help

Possible causes

  • ISP Provider Error
  • Corrupt network card driver
  • Stuck Router
  • IP address conflict